# PocketStand — public BuildBook record, release 1.1

Author: D4Maker
Date: 17 November 2026
Status: Printed, photographed and released on Creality Cloud.
Model download: https://www.crealitycloud.com/model-detail/pocketstand-print-in-place-folding-phone-stand
Build story: https://d4maker.com/stories/pocketstand

## Original intent and change of brief

The V0.1-era brief, including Build Book V0.1.1, aimed for a genuine wallet-card stand: maximum 85.6 × 53.98 × 1 mm, PLA, no repeatedly flexed living hinge. It also included a separate keyring concept.

The chosen print-in-place frame/backing/brace approach kept a compact footprint but exceeded the thickness goal. Release 1.1 is a 9 mm pocket stand, not a wallet-compatible 1 mm card. The keyring idea remains separate and unfinished. Reference imagery communicated the folding format; reference model geometry was not copied.

## Six development stages

1. A01 — print the captive frame/backing/brace layout. Owner feedback: works, but short male hinge ends could come out and the catch was low.
2. A02 — lengthen hinge ends; raise the catch; lengthen the backing to use the spare end space. Owner feedback: stronger hinges, less prone to release; deliberate pressure could still separate them.
3. A03 — strengthen the flat frame/body to 2.6 mm, widen frame support and raise lip/catch. Keep the catch floor at 1.6 mm.
4. A04 — remove the broad seating ramp; rebalance inner/outer frame widths; integrate the lip directly into the base edge.
5. 1.0 — round corners, bevel sharp edges and use a 15° outward lip. Plain and D4Maker.com variants. Owner feedback: more stable, successful cloud print; cased portrait retention still inconsistent.
6. 1.1 — raise the lip to 9 mm with a curved lower face and a 45° inward upper return; widen the catch to 6.4 mm. Owner confirmed this is the actual printed, photographed and listed release.

Prototype labels, document versions and model release numbers are different records; this list does not invent six versions of the initial document.

## Released dimensions and printing

- Folded: 85.2 × 53.6 × 9 mm.
- Flat body/backing/brace: 2.6 mm; catch floor: 1.6 mm.
- Lip: 9 mm; inward upper return: 45° from vertical.
- Catch: 6.4 mm wide, 7 mm high.
- Development baseline: Creality K2 Pro, PLA, standard 0.4 mm nozzle.
- Flat supplied orientation, supports off. 0.20 mm layers are a starting recommendation, not a reconstructed full cloud profile.
- Supplied slice estimate: 23m 59s, 10.77 g, 3.61 m. These are estimates, not measured elapsed time or scale readings.

## Evidence and limits

Real owner photographs show the 1.1 print folded, deployed and supporting a cased phone in landscape. Digital checks covered closed meshes, dimensions, hinge relationships and sampled motion. Those digital checks are not physical strength or endurance tests.

No universal 7–16 mm case compatibility, 300 g load rating, cycle-life result, hot-car suitability or universal portrait retention is claimed. Check the particular phone and case on a level surface before letting go. Do not force a fused joint or bend the sides to release pins.

## What the record preserves

The reason for each change, the difference between lengthening and thickening the backing, the floor that stayed unchanged, the actual 45° return, and the identity of the photographed release. Printable model downloads remain on Creality; this public summary is not the private CAD/source archive.
